- #LSI RAID DRIVER WINDOWS 2008 INSTALL#
- #LSI RAID DRIVER WINDOWS 2008 SERIAL#
- #LSI RAID DRIVER WINDOWS 2008 DRIVERS#
- #LSI RAID DRIVER WINDOWS 2008 SOFTWARE#
Use the imagex command to unmount and commit the modified Windows Server 2008 SP2 boot WIM image. Sun Storage 6 Gb SAS PCIe HBA option (SG-SAS-INT-Z or SG-SAS-EXT-Z).
#LSI RAID DRIVER WINDOWS 2008 DRIVERS#
Repeat Steps 7d and 7e for each additional device driver (as described inĭevice Drivers to Add to WIM Image(s)) that is required in the boot WIM image: Use the peimg command to add the LSI MegaRAID device driver for the Sun Storage 6 Gb SAS PCIe RAID HBA option (SG-SAS-R-INT-Z or SG-SAS-R-EXT-Z) to the Windows Server 2008 SP2 boot WIM image.įor example, to add the LSI MegaRAID device driver for the Sun Storage 6 Gb SAS PCIe RAID HBA option (SG-SAS-R-INT-Z or SG-SAS-R-EXT-Z), type: Use the cd command to change the directory to the device driver repository containing the Windows Server 2008 SP2 device driver for the Sun Storage 6 Gb SAS PCIe RAID HBA option (SG-SAS-R-INT-Z or SG-SAS-R-EXT-Z):įor example, to change to the directory containing the LSI device driver for the Sun Storage 6 Gb SAS PCIe RAID HBA option (SG-SAS-R-INT-Z or SG-SAS-R-EXT-Z), type:Ĭd C:\Unattend\Drivers\W2K8\lsi\1.19.2.64 Use the imagex command to mount the Windows Server 2008 SP2 boot WIM with read/write permissions to the temporary directory mount point. Use the cd command to change the directory to the folder containing the Windows Server 2008 SP2 boot WIM.Ĭd DVDDrive:\RemoteInstall\Boot\圆4\images Use the mkdir command to create a temporary directory mount point to mount the Windows Server 2008 SP2 boot WIM image. In the Deployment Tools Command Prompt, perform the following:
Launch and run the Deployment Tools Command Prompt as Administrator.Ĭlick Start -> All Programs -> Microsoft Windows AIK, then right-click Deployment Tools Command Prompt, and select Run as Administrator. To import the Windows Server 2008 SP2 boot image, click Next twice then clickĭisable the Windows Server 2008 SP2 boot WIM using the Windows Deployment Services Administration:Ĭlick and expand Boot Images, right-click Microsoft Windows Server (Setup)圆4, then select Disable. Right-click Boot Images and select Add a Boot Image, then click Browse to specify the Windows Server 2008 SP2 boot WIM file. Perform the following to launch the Windows Deployment Services Administration tool and import the Windows Server 2008 SP2 Boot WIM.Ĭlick Start -> All Programs -> Windows Deployment Services. Insert the Windows Server 2008 SP2 DVD media into the DVD reader of the system that is hosting the Windows Deployment Services. Note that if the required PCIe SAS HBA device driver (as described in Device Driver Directory Location on Tools and Drivers DVD and Device Drivers to Add to WIM Image(s)) is not added to the boot.wim image, the Windows Server 2008 SP2 installation will fail. Device drivers are not required at boot time for Windows Server 2008 R2 installations.įor Windows Server 2008 SP2 installations only, perform the following steps to add the appropriate PCIe SAS HBA LSI device driver (MegaRAID or MPT2) to theīoot.wim image.
#LSI RAID DRIVER WINDOWS 2008 SOFTWARE#
The LSI Embedded MegaRAID Software Configuration Utility adds RAID functions to enhance system efficiency and data security by supporting RAID 0, RAID 1, RAID 10, RAID 5, RAID 6, RAID 50 and RAID 60.Note - If you are performing a Windows Server 2008 R2 installation, skip this procedure. The controllers support internal and external storage devices, which let you use a system that supports enterprise-class SAS.
#LSI RAID DRIVER WINDOWS 2008 SERIAL#
MegaRAID provides drivers for the MegaRAID SAS RAID contro llers, which bring up to 12 Gb/s Serial Attached SCSI performance and 6.0 Gb/s SATA III performance to host adapter, workstation, and server designs. LSI Corporation - 6 - MegaRAID SAS Device Driver Installation User Guide May 2013 Chapter 1: Overview Driver Names The random deletion of logical drives that were created by using MegaRAID Storage Manager™ (refer to the MegaRAID SAS Software User Guide for more information) The use of the remaining array capacity by MegaRAID Storage Manager 1.1.2 Driver Updates.
#LSI RAID DRIVER WINDOWS 2008 INSTALL#
The ESXi install will use 1GB for the OS and 4Gb for scratch. 5GB is all that is necessary for ESX (i) and ESX is less.
It is better to create a small virtual LUN or virtual disk on an array to isolate the ESX (i) installation from the datastore if the controller supports that capability.
0 kommentar(er)
